Honda BF8 Outboard Engine

All Honda outboards are power rated with N.M.M.A. procedures. Specifications are subject to changes without prior notice. Specifications subject to change without prior notification.

Features

Honda Four-Stroke Engine Design

The BF8s utilize an all-new twin cylinder, in-line, OHC design powerhead. World renowned Honda quality combine proven reliability, quiet operation, low emissions and superior fuel efficiency, with no gas/oil mixing.

PGM-IG Ignition

PGM-IG ignition provides reliable starts and optimum ignition timing enhancing running performance and fuel economy across the entire speed range.

Complete Engine Management System

Electronically controlled monitoring system protects the engine components from over-revving, low engine oil pressure and overheating.

EPA2008 & C.A.R.B Star Three Emission Compliant

The Honda BF8s meet the strickest emission regulations for the year 2008 now!

Pendulum-Motion Vibration Dampening

An exclusive Honda feature, the pendulum-motion mounting system for the powerhead helps absorb the vibration, including longitudinal vibration which was difficult to reduce successfully by conventional rubber mounts. The pendulum mount does this without the use of a heavy balancer shaft which also significantly reduces overall weight.

Lightweight Rounded Design

Easy to transport, ideal for 10~12 ft. fishing boats, inflatables or for auxillary sail and trolling power. Also, the BF8s rounded ergonomics won't catch fishing line as easily.

Easy-Pull Starting

The new programmed ignition system sets the ignition system during start-up to reduce the effort required to pull start the engine.

Forward Mounted Shift Lever

Allows more control and comfort in shifting.

Regulated Charging System

A high quality regulator/rectifier is standard on all models to prevent overcharging the battery.

High Output Charging System

All electric start models are fitted with a high output charging system that will deliver 6 amps at only 3,000 rpm to keep your electronics working and batteries charged.

Quick-Twist Throttle Friction Adjuster

A simple twist of the throttle friction collar located right at the throttle grip allows you to adjust the throttle tension up or down, minimizing driver fatigue.

Front Mounted Steering Friction Adjuster

A new quick-adjust lever design located just above the transom bracket allows for precise adjustments at your finger tips.

Integrated carrying Handle

A convenient, fold away carry handle is situated at the exact horizontal balance point of the engine so that the engine carries more easily in a level position.

Increased Reverse Thrust

When reversing, The exhaust gases are diverted through additional exhaust relief ports above the cavitation plate allowing the propeller to back-up into clean, bubble-free water increasing reverse thrust.

Fresh Water Flush Port

Allows easy hook-up to fresh water supply tp flush debris and salt water out of the engine extending the life of the outboard.

Shallow Water Drive

Allows you to run in shallow waters with the engine raised to reduce the risk of damage to the lower gearcase.

Long Tiller Handle

The BF8 tiller models use a long tiller handle for increased control and reduced steering effort. The tiller handle is also made of a new lightweight composite for increased strength and weight reduction.

Standard Fuel Tank and Propeller

A 12.5 litre fuel tank and aluminum propeller are included as standard equipment.

Three Year Warranty

The best outboards are backed by the best warranty, 3-years parts and labour!